Thursday, March 18, 2010

Carbon Dioxide Pumps

TOMCO2 has the pump to fill any type and size high pressure cylinders, low pressure CO2 transfer pumps and a dual pump assembly for circulating liquid loop systems. We offer large powerful pumps for high volume filling, as well as smaller economical pumps for occasional demand. Regardless of size, any TOMCO2 pump is highly energy efficient and reliable.
 

CM-35 Cylinder Filling Pump

Designed to fill all carbon dioxide cylinder sizes rapidly and efficiently. Works well with dip tube cylinders and fire extinguishers.

cm-35-pump

Features:

  • Filling rate of 35 lbs/min (16 kg/min)
  • Dual drive belt driven (4-groove)  for reliability
  • 5 HP TEFC electric motor
  • Indoor and outdoor installations
  • Filling hose, filling valve and handwheel connector included
  • Stainless steel piston
  • Stainless steel drive cover
  • Spare parts kit included
  • Manifold included
  • 230/460 Volt, 3 Phase, 60 Hz. (Single phase optional)
  • Dimensions (L x W x H): 36" (91.44 cm) x 21" (53.34 cm) x 39.5" (100.33 cm)
  • Weight: 500 lbs (227 kg)

Note: Special voltages can affect filling rates

> Learn more about the CM-35 Cylinder Filling Pump

 

AH-45 Cylinder Filling Pump

The rapid and quiet solution for filling all types of cylinders from bulk storage.

Ah-45eg

 

 

 

 

 

 

 

 

> Learn more about AH-45 Cylinder Filling Pumps

 

Cylinder Filling Systems with Automated Scales

Accurately fills all types of cylinders. Push button operation with your choice of the AH-45 or CM-35 in combination with an electronic scale and automatic switching valves.
cylinder-filling-system-auto-scales

 

 

 

 

 

 

 

 


> Learn more about Cylinder Filling Systems with Automated Scales

 

Model B Cylinder Filling Pump

The economical solution for small cylinder filling. (Fills from CO2 low pressure bulk storage units only)
model-b-cylinder-pump

Features:

  • Filling rate of 10 lbs/min (4.536 kg/min)
  • Inlet pressure: 300 psig
  • Horsepower: 0.5 HP
  • Electrical Characteristics: 115 Volts, 60 Cycle, 1 Phase
  • Dimensions (L x W x H): 21" x 12½" x 13½" (53.3 cm x 31.7 cm x 34.3 cm)
  • Weight: 90 lbs (41 kg)



> Learn more about Model B Cylinder Filling Pumps

 

AH-45-HP High Pressure System

When high-pressure vapor Carbon Dioxide is needed, this pump and vaporizer combination gets the job done.
ah45hp

 

 

 

 

 

 


> Learn more about AH-45-HP High Pressure System

 

Carbon Dioxide Transfer Pumps

TOMCO2 Carbon Dioxide transfer pumps are available for transferring low pressure liquid CO2 from one approved storage vessel to another. These units are shipped as a complete assembly which is suitable for outdoor use.
carbon-dioxide-transfer-pump

Features:

  • Positive displacement vane pump with 400 psig MAWP
  • Electric motor and controls suitable for outdoor service
  • Standard belt drive
  • Electrical Characteristics: 240/460 Volts, 60 Cycle, 3 Phase (Other electrical available upon request)
  • Capacities are based on a maximum differential pressure of 50 psig
  • Differential pressure by-pass valve
  • Inlet wye strainer
  • 1/2" purge ball valve and safety relief valve




> Learn more about Carbon Dioxide Transfer Pumps

   

Dual Pump Assembly

Supply liquid Carbon Dioxide economically and efficiently to your circulating loop. Two pumps give you the security of a back-up pump.

dual-pump-assembly
Features:
  • Capacity of 5 gal/min (18.327 ltr/min)
  • Two liquid CO2 Pumps
  • Switching valves
  • Safety relief valves
  • Pump selector switch
  • Enclosed in rain-proofed housing
  • 1" (2.54 cm) M.P.T. inlet and outlet connections
  • ½ HP, 900 rpm motors
  • Electrical Characteristics: 220 Volt, 60 Hz, 3 Phase
  • Dimensions (L x W x H): 30½" x 31¼" x 24" (77.5 cm x 79.4 cm x 61 cm)
  • Weight: 200 lbs (90 kg)
  • Larger pump capacities available upon request


> Learn more about Dual Pump Assemblys

   

TOMCO2 Equipment Company

3340 Rosebud Road
Loganville, GA 30052
Phone: 770-979-8000
Toll Free: 800-832-4262
Fax: 770-985-9179


> Contact Us