CA Series - Horizontal

The CA-Series Carbon Dioxide storage unit is designed for balanced weight distribution in areas where placement is a concern. The unit is mounted on wide flanged rectangular skids.  As with all our storage units, maximum efficiency of operation is our first priority. This low-maintenance storage unit has totally enclosed valves, electrical and refrigeration, and may be locked for safety and security. Vaporizer equipment is available. A sleek aluminum factory finish conceals a 4" (10.16 cm) polyurethane insulation which allows for long life and maximum protection. Auxiliary outlets are available for additional liquid and vapor supply needs.

General Specifications:

• Pressure vessel: Constructed in accordance with Section VIII, Division 1 of the ASME Code for Unfired Pressure Vessels for a maximum allowable working pressure (MAWP) of 350 psig (24.1 bar).  2" NPS & under tank nozzles are schedule 80 stainless steel
• Seismic:  Per UBC 1997 seismic zone 4, importance factor of 1.25, soil profile types Sa, Sb, Sc, Sd or Se, 2 km or less to a type A seismic source.  Design to other Codes available on request.
• Piping: Schedule 80 seamless pipe, 2,000 lbs (907.20 kg) forged steel fittings, 1/4 turn stainless steel isolation valves
• Safeties: Dual ASME approved direct spring operated, sized for unconfined outdoor installation.  Larger capacity relief valves will be required for installation when located indoors or in a fire area.
• Insulation: 4" (10.16 cm) Polyurethane
• Outer jacket: .063" (0.16 cm) Aluminum
• Vaporizers Optional: Steam, water or electric, capacities to 6,000 lbs/hr (2721.60 kg/hr)
• Liquid level gauge: Differential pressure indicator type with 6" (15.24 cm) dial
• Pressure gauge: 0 - 600 psig with 6" (15.24 cm) dial
• All models use 208/220/230/460 V, 60 Hz, 3 Phase
• Control cabinet: .04" (0.1 cm) prefinished aluminum with lockable door
• Manway installed for internal inspection and ease in cleaning

Horizontal Series C Weights and Dimensions